Voor 17,00u besteld,
vandaag verzonden*
*Indien product voorradig is

W02 5.5 inch Car OBDII HUD Fuel Consumption Warning System Vehicle-mounted Head Up Display Projector with LED

Schrijf de eerste beoordeling van dit product

€ 59,95

Wordt vrijdag, mei 3 verzonden indien besteld binnen 3 uur en 59 minuten!



What is the HUD?

** Head Up Display which is abbreviated to HUD which is short for Head Up Display with the meaning of Look-up display device or look-at-the-front-horizontally display device is designed for preventing accident which can project important information (e.g. vehicle speed) onto the front windshield at the eye level of the driver. Besides the display location and brightness can be adjusted through automatic induction which can prevent the driver from looking down at the instrument panel and shorten the time of eyes for the blind spot in front.

This can avoid breaking rules and regulations due to speeding in many speed-limited sections. What's more important it can enable the driver to read the number instantly without shifting horizon which is of vital value in reducing traffic accidents caused by absent-mind due to looking down.

Description:

** Our multifunctional HUD product is developed based on OBDⅡ interface and has good cost-performance ratio. It is designed by adopting the latest integrated circuit with stable performance and has a beautiful and elegant appearance. The installation and adjustment examination can be finished within 3 minutes by using an easier and safer method.

Notes:

1. Automatically adapt to the automobile models with OBD II (Bus Automatic Diagnostic System) interface.Check if it has the automobile diagnostic socket under the steering wheel (most of car has this socket manufactured after the year 2003).

2. Identify the car's 16-pin diagnostic socket (Figure2) connecting the OBDII cable to the 16-pin diagnostic socket if it has this socket.

3. Put the non-slip pad onto the instrument pane then put HUD on the non-slip pad you can adjust the angle an position.

4. The reflective film may be affixed to the forward position of HUD and stick to the front windshield ensuring that the information such as car speed can be projected to the reflective film.

Main Features:

1. Plug and play: HUD can auto adapt to vehicle type which in line with OBDII or EUOBD (On-Board Diagnostic System).

2. Comprehensive display: HUD can display many parameters at the same time as follows vehicle speed engine speed water temperature (voltage throttle valve position ignition advance angle time of 100 km acceleration) fuel consumption mileage low fuel tips engine failure.

3. Diversiform display mode. Driver can chose normal display mode high- speed display mode and automatic display mode.

4. Free switch: Km and mile can be switched freely to meet the need of inch auto meter.

5. Suitable size: The display area is 5.5 inches which is very clear for driver to read data.

6. Automatic power on and off: Starting with the vehicle starting stopping with the vehicle stopping to protect the vehicle’s battery. Moreover we pre- serve the hand switch function to control the HUD.

7. Flexible alarm mode: HUD can offer single-stage and four-stage over speed alarm modes to choose to make driving safer.

8. Engine speed alarm: It contributes to shift gear in time to save fuel also has significance to new driver.

9. Flexible brightness adjustment: The brightness can be adjusted automatically or manually to reach the best state which is in harmony with the environment.

Specification:

1. Model: W02

2. Screen: 5.5 inch

3. Data measurements: Vehicle speed fuel consumption live data fuel pressure

4. Product size: 15 cm x 8.5 cm x 1.4 cm / 5.91 inch x 3.35 inch x 0.55 inch

5. Package contents: 1 x Host machine of HUD 1 x reflecting film OBD connecting line 1 x instruction book 1 x non-slip mat 1 x warranty card

Eigen labels

Gebruik spaties om labels te scheiden. Gebruik enkele aanhalingstekens (‘) voor woordgroepen.